Step-by-Step: How the DTF Printing Process Works

Introduction:
DTF printing might sound technical, but it follows a clear, repeatable process. Here’s a simple breakdown for beginners or those considering switching to DTF.

Main Content:

1. Design Creation: Start by preparing your artwork in a high-resolution PNG or TIFF file with transparent background.

2. Printing on Film: Use a DTF printer to print the design onto PET film with special DTF inks.

3. Adhesive Powder Application: While the ink is still wet, apply DTF adhesive powder over the print.

4. Curing: Heat the film to melt and bind the adhesive.

5. Heat Transfer: Place the film onto the fabric and press using a heat press (usually at 160–170°C for 15–20 seconds).

6. Peel and Finish: Peel the film (hot or cold, depending on the film type) and optionally repress for durability.

Conclusion:
With a smooth workflow and fewer technical requirements than some other methods, DTF printing allows even beginners to produce professional-quality designs on a wide variety of garments.